O-Z/Gedney cable supports are used to support cables in vertical raceways or risers. They relieve the strain that would be placed on terminations, the interior of panels, or other devices to which the cables are connected. Properly designed cable supports must not only be capable of supporting a given weight of cable with a good margin of safety but must also support the cable without damaging the insulation or excessively reducing the amount of insulation over the conductor in the area where the cable is supported. O-Z/Gedney has been furnishing Cable Supports to the electrical industry for almost 100 years that meet these requirements.

O-Z/Gedney Cable Support, 1-Piece Plug, Series: S Series, 2-1/2 in Size, Surface Mounting, For Use With: EMT/IMC and Rigid Conduit, Ductile Iron/Malleable Iron, Hot Dipped Galvanized, 3-3/4 in Dia x 3 in H Dimensions

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/O_Z_Gedney_C_2004_1_Brochure.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/O_Z_Gedney_C_2004_1_Brochure.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_d36d59e1ca54dca1495fb2f0852bffa75408d5aba3e060f22aa1dc9a7f2061d3.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_d36d59e1ca54dca1495fb2f0852bffa75408d5aba3e060f22aa1dc9a7f2061d3.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/O_Z_Gedney_TN_75_110_Warranty.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/O_Z_Gedney_TN_75_110_Warranty.pdf

• Threaded for rigid conduit and IMC
• Use with all types of insulations at all voltages
• The fastest and easiest type cable support to install
• The knurled insulating inner surface and one piece impregnated hardwood pOZi-grip plug provide positive support well in excess of code requirements
• Body only can be ordered separately, for installation prior to wire pulling, plug only can be ordered later, once wires are in place
• If mounting on a non-metallic/non-grounded conduit, a LayIn-Lug™ grounding lug should be mounted on cable support body
• For threadless rigid conduit, threadless IMC, or EMT, the body can be attached to the male threads of a set screw or compression connector
• For PVC conduit, use a PVC terminal adapter