The Raychem C910-485 is a compact, full featured, microprocessor-based, single-point commercial heating cable controller. The C910-485 provides control and monitoring of electrical heating cable circuits for commercial heating applications, with built-in 30 mA ground-fault protection and RS-485 communication capability. The C910-485 can be set to monitor and alarm for high and low temperature, high and low current, ground-fault level, and voltage.

RAYCHEM, C910-485, Heating Cable Controller, 1-Point Compact, Series: 920, 0 to 200 deg F Control, 100 to 277 VAC, 30 A, Digital Display, 22 to 8 AWG Screw/14 to 6 AWG Two Box Lug Electrical Connections, 1 in H x 8-1/2 in W x 6-1/4 in D Dimensions, Fibre Reinforced Plastic

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/nVent_10170_026_Instruction_Installation_Manual.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/nVent_10170_026_Instruction_Installation_Manual.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/nVent_10170_026_Specification_Sheet.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/nVent_10170_026_Specification_Sheet.pdf

• Ready to install right from the box, eliminating the need for custom panel design or field assembly
• Password protection
• Low/high temperature, low current, ground fault alarm
• Programmable keypad
• Heater on, alarm condition, receive/transmit data on LED
• Non-volatile, restored after power loss, checksum data checking memory
• Isolated solid state triac, SPST, 0.75 A maximum
• 20 to 100 mA trip
• Alarm conditions and programming settings are easy to interpret on the full-text front panel
• The FRP NEMA 4X rated, enclosure is approved for use in indoor and outdoor locations
• Extensive control, monitoring, alarm, communications and protocol gateway capabilities
• Reliable during long life
• Maintenance free
• Raychem ProtoNode multi-protocol gateways are available to integrate up to eight C910-485 controllers into BACnet, Metasys N2 and LonWorks BMS systems
• Double-pole, mechanical relay
• Diagnostic test interval adjustable from 1 to 240 min or 1 to 240 hr