Crouse-Hinds series FS and FD device boxes are installed in non-hazardous area conduit systems to accommodate wiring devices, act as pull boxes or provide openings for taps and splices. They are suitable for use in wet locations when used with gasketed covers. FS and FD device boxes are available in two box depths with a wide variety of gang configurations, hub configurations and hub sizes. They are manufactured in cast iron, aluminum, stainless steel and malleable iron. Malleable iron boxes are also available with a hot dip galvanized finish for added corrosion protection against road salt and other harsh environmental factors.

EATON Crouse-Hinds Condulet® Device Box, Deep, Series: FDC, 3/4 in, 1 Gang, For Use With: Threaded Rigid/IMC Conduit, Flush Mount, Sand Copper-Free Aluminum, Natural, 2-3/4 in W x 2-11/16 in D x 6-1/32 in H

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/FSCM2_Catalog.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/FSCM2_Catalog.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/FDC2_SA_Specification_Sheet.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/FDC2_SA_Specification_Sheet.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/LB38SS_Technical_Bulletin_02.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/LB38SS_Technical_Bulletin_02.pdf

• Internal green ground screw standard ON boxes
• Mounting lugs standard on most box
• Tapered threaded hubs (NPT) with integral bushing
• Ample wiring room provided in either FS/FD configuration
• Covers for flush mounting extend to conceal the rough plaster line
• Use FD if device to be enclosed exceeds 15/8 in D