The 6212 Fiberglass 12 ft Step Ladder is Ideal for the homeowner or the professional. With a duty rating of 300 pounds, it features a HolsterTop with the lock-in System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the Edge® structure. The EDGE bracing system helps protect the rail from damage. Each TRACTION-TRED® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.

WERNER® Step Ladder, Type IA, Series: 6200, 12 ft Ladder Height, 300 lb, ANSI Code: A14.5, Fiberglass, 11 Steps, 78-1/4 in Base Spread, 33-7/8 in Bottom Width, 3 in W Tread

This Louisville 12 foot non-conductive fiberglass step ladder has a load capacity of 300lbs, rated ANSI Type IA. This ladder is equipped with the new and innovative Raptor Top with magnet and multiple tool slots, SHOX impact absorption system, new Raptor boots with non-marring bonded tread mechanically fastened to the upper boot to create a secure slip-resistant footing, inside spreader braces, wide back braces, and double-rivet step construction. The Louisville FS1512 step ladder meets or exceeds the safety standards set by ANSI, CSA, and OSHA.

• VIDEO LINK https://www.youtube.com/watch?v=U7ewPYJmFnU&feature=youtu.be

• Holster top is now ToolLasso ready
• Back-up plates reinforce all top connectors
• Shoulder bolt and nut on top hinge
• 4 rivets attach top to each front rail
• All steps and two rear horizontals are knee braced
• Double riveted, slip-resistant TRACTION-TRED® steps
• Heavy duty internal spreaders
• Full set of rear horizontals spaced one per foot
• Shoe pads riveted to the edge - molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage
• Every rivet backed up by metal plate or washer to protect rails
• Optional yellow molded pail shelf kit, model no, 76-2
• Energy diffusing geometry
• 3-1/8 in front wide x 1-7/8 in rear wide rail
• 1-3/16 in front wide x 1-3/16 in rear back wide flange