The complete family of transformers from GE provide quiet, reliable transformer operation. All of the dry-type transformers through 1000 kVA are UL listed under the requirements of standard 506 and 1561. In addition, each transformer meets the requirements of NEMA ST-20, 1992. Type QB, QMS and QMS 3-models are cUL listed. General purpose transformers are rated 600 VAC and below for supplying appliance, lighting and power loads from electrical distribution systems. Standard distribution voltages are 600, 480 and 240 VAC, standard load voltages are 480, 240, 208 and 120 VAC. The transformer is used to obtain the load voltage from the distribution voltage. Since no vaults are required for installation, these transformers can be located right at the load to provide the correct voltage for the application. This eliminates the need for long, costly, low voltage feeders.

GE General Purpose Transformer, Dry Encapsulated Standard, Series: 9T51B, 277 VAC Primary, 120/240 VAC Secondary, 2 kVA, 60 Hz, 1 ph, 2 Taps, Wire Lead, 14250 Frame, Wall Mount, IS-12, NEMA 3R, 40 deg C, Silicon Steel Housing, 9.38 in W x 11.12 in H

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/GE_9T51B0192_Specification_Sheet.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/GE_9T51B0192_Specification_Sheet.pdf

• These GE transformers feature an encapsulated core and coil in a NEMA 3R non-ventilated weatherproof enclosure
• Knockouts provided on back and bottom
• High grade silicon steel core
• Mounting holes on side for easy access
• Wiring compartment includes ground stud
• K1-factor rated transformer
• IS-12 insulation system
• No tap changer
• Core and coils are contained within a NEMA 3R non-ventilated weatherproof enclosure
• Copper windings
• Electrostatically unshielded
• Transformers are built to standard sound level
• 55 deg C temperature rise
• 105 deg C insulation temperature