The 208 to 277 V 50/60 Hz. 2000 Watt "T" Thin line for Flood/Spot Fixt. Swivel Mtg. The K4200 Series Photo Controls feature stern and swivel mounting, with thermal-type controls. Thermal-type photo controls, which are available in single or multi-voltage models, provide dusk-to-dawn lighting control and a delay action, which eliminates loads switching OFF due to car headlights and lightning. The thermal-type controls feature a cadmium sulfide photocell and a sonic-welded polycarbonate case and lens to seal out moisture. The design utilizes a dual temperature compensating bi-metal and composite resistor for reliable long life operation over ambient temperature extremes.

Intermatic® Photo Cell, Thermal, Series: K400, 208 to 277 VAC, 50/60 Hz, 15 A, 3100 to 4150 W Tungsten, 1700 to 2300 VA Ballast, 18 AWG Wire, Cadmium Sulfide Sensor, 1 to 5 FC ON/3 to 15 FC OFF, Environmental Conditions: -40 to 158 deg F Operating Temperature, Stem Mount, Polycarbonate, Gray, 1-3/8 in Dia x 4 in H

• Installation Instructions https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/Intermatic_K4253_Instruction_Sheet.pdf
• Specification Sheet https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_1520612161440.pdf
• Specification Sheet https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://www.ideadigitalcontent.com/files/11158/SPE_051_K4200Series_2pg.pdf

• Mechanical bi-metal switch with cadmium sulfide photocell
• Delay feature prevents unwanted off switching
• High strength, UV resistant plastic housing
• Swivel with 1/2-14 NPSM threaded stem
• Washer gasket and locking nut included
• 8.3 A, 208 to 277 VAC, 50/60 Hz inductive rating
• 15 A, 208 to 277 VAC, 50/60 Hz incandescent load ratings
• 3 to 15 fc activation off
• 1 to 5 fc activation on
• 30 to 90 sec sensor time delay
• On fail mode
• Sonic welded polycarbonate housing
• 6 in lead wire