The L7X 6” Recessed Incandescent Housing from Lithonia Lighting is intended for new construction. Approved for all ceiling and wiring types and direct burial into insulation. The housing is constructed of aluminum with a galvanized steel pan and is tested to meet current energy codes.

Lithonia Lighting®, L7X R6, Downlight Housing, Airtight Contractor Select, Series: L7X, 120 VAC, 7 in Ceiling Opening, E26 Incandescent Lamp, 1 Lamps, IC/Non-IC Insulation, Ceiling Mounting, For Use With: 7O2 PF/7O2A Open Narrow Flange/7B2 TOR/7B2 TRMW TOR Baffle Narrow Flange/7RE1 Regressed Eyeball Wide Flange, 6 in Diameter, 8-3/4 in Height, 23 in Width, Steel Housing Material

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Lithonia_Lighting_L3_U_Installation_Manual.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Lithonia_Lighting_L3_U_Installation_Manual.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Lithonia_Lighting_6O2_R6_Specification_Sheet.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Lithonia_Lighting_6O2_R6_Specification_Sheet.pdf

• Recessed incandescent housings for 2x8 new construction
• Approved for direct burial in insulation and all ceiling and wiring types
• Air-tight, galvanized steel pan with aluminum can and junction box with four built-in ROMEX clamps and ground wire
• Rated for 90 deg C
• 120 V only
• Aluminum housing with three remodel clips for installation in existing plaster, sheet rock or mechanical ceilings