The 3M™ QSLV-M series cold shrink quick splice kit adheres to a one-of-a-kind 3-core system. Simply place the sleeve on a connector and remove 2 of the cores to start splicing. The last core is used to support the structure of the sleeve itself. The factory expanded tubular sleeve features waterproof sealing mastic tape on each end. This kit is size-configured to adapt to differences in connector sizes, as well as to prevent damage to the seal and insulating aspects. This kit is rohs 2011/65/EU compliant and ANSI Certified.

3M™, 7000058804, Quick Splice, Cold Shrink, Series: QSLV-M, 0.4 in Diameter Minimum, 1.6 in Diameter Maximum, 4-1/4 in Length, 1400 psi Tensile Strength, Elongation: 7.5, 365 V/mil Dielectric Strength, EPDM, Black

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_13ccade468e55c6b449443b0e95272e51c3f30757a7b2c5ef00018d520567306.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_13ccade468e55c6b449443b0e95272e51c3f30757a7b2c5ef00018d520567306.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_906b71f6a1ab57aa4011732af246a20cb35c2d2575060a6f0da51d4a7480d472.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_906b71f6a1ab57aa4011732af246a20cb35c2d2575060a6f0da51d4a7480d472.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_cdce700beca3fddcee25c96adef9be8aa39bd7c8cb3356f870de863190a8d4f6.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_cdce700beca3fddcee25c96adef9be8aa39bd7c8cb3356f870de863190a8d4f6.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_fca0e1a01c9480a47c2ad70837a0f977bbd27c236006c572550ad6132b691c32.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_fca0e1a01c9480a47c2ad70837a0f977bbd27c236006c572550ad6132b691c32.pdf

• Low voltage single conductor insulated cable
• 1 kV voltage rating
• Simple hand installation, no tools required
• No heat source
• Accommodates wide range of cable sizes, including street lighting
• Good thermal stability during storage and shipping
• Seals tight, retains resiliency and pressure, even after years of aging and exposure
• Resists acids and alkali
• 2 awg to 1000 kcmil (cu), 2 awg to 500 kcmil (al) conductor size
• Factory-expanded for easy installation
• For direct-bury, secondary low-voltage, non-shielded cable splices
• Rated for up to 1 kV applications
• Sleeve is made of EPDM rubber which contains no chlorides nor sulfur, sealing mastic provides a water-resistant sealing
• The third, center segment of the core remains inside the cold shrink tube, acting as a support structure
• Offers excellent wet electrical properties and resists water, acids and alkalis
• Withstands temperatures of -40 deg C to 90 deg C (-40 deg F to 194 deg F)