The ODS15 uses passive infrared (PIR) detection technology to monitor a room for occupancy through a segmented Fresnel lens. This specialized lens divides the field-of-view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches the lights ON. The lights will remain ON as long as there is an occupant moving through the sensor zones.

Decora® Occupancy Sensor, 1-Pole Low Profile Photocell Controlled Single Relay, 120/230/277 VAC, 120 mW at 120 VAC/280 mW at 277 VAC Power, PIR Sensor, 2100 sq-ft Coverage, 180 deg Viewing, 30 s to 20 min Time Delay, Fluorescent/Incandescent Lamp, 50/60 Hz Response, Manual ON/Automatic OFF Control Output, Wall Mounting, 32 to 122 deg F, White, 4.06 in H x 1.75 in W x 1.35 in D Dimensions

• Application Guide https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/Leviton_OPB15_DW_Application_Guide.pdf
• Application Guide-1 https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/Leviton_OPB15_DW_1_Application_Guide_1.pdf
• Installation Instructions https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/Decora_ODS15_IDG_Installation_Sheet.pdf
• Material Safety Sheet https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://www.ideadigitalcontent.com/files/10962/MSDS.pdf
• Specification Sheet https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/Decora_ODS15_IDG_Datasheet.pdf
• Specification Sheet https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_8ce5f65ba52ee294c03ad47bb84108a8d6a0db17e5efd62a466150ebbf383f6d.pdf
• Specification Sheet-1 https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/Decora_ODS15_IDI_Datasheet_1.pdf
• Technical Bulletin https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/Leviton_ODC0P_W_Technical_Bulletin.pdf

• Fits in standard wallbox and replaces single pole wall switch, ground connection required, gangable with other units
• Low profile design eliminates obtrusive "scanning-device" look
• Convenient pushbutton provides manual On/Off light switching at any time
• Two dual element PIR sensors used to widen detection range, relay switches at the zero-crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts
• Segmented fresnel lens provides optimum sensitivity and performance, designed with an extensive "minor motion" area where even slight body movements will be detected
• Vandal resistant PIR lens, one unit can be used for 120 through 277 VAC lighting, compatible with both electronic and magnetic ballasts
• Horizontal field of view may be adjusted between 180 and 60 deg of arc by using integral blinders located on either side of the lens, no masking tape required
• Manual On/auto Off mode for installations where manual On switching is required but auto Off switching is still desired for CEC Title 24 energy savings
• To comply with T24, red LED indicator light flashes when sensor detects motion to verify detection is active
• Time delay - in adapting mode, the time delay can be configured from 30 s (test mode), 5, 10 and 20 min, in non-adapting mode, the delay can be configured from 5, 10, 20 and 30 min
• Light sensor adjustable ambient light override ranges from approximately 20 LUX to 5000+ LUX to prevent lights from turning On automatically during periods of ample natural light, increasing energy savings
• Light sensor enables the load hold Off feature once level has been set, no neutral design is optional for retrofit applications
• Self adjusting delayed Off time interval compensates for real time occupancy patterns, preventing unnecessary On/Off switching
• Exclusive walk through feature provides increased energy savings by not leaving the lights On for an extended period after only momentary occupancy
• Vacancy confirmation - when the time out expires and the relays turn Off, a 30 s vacancy confirmation exists to turn the relays back On
• False detection circuitry
• Presentation mode feature for slide or film presentations, allows pushbuttons to turn lights Off and keep them Off while the room is occupied
• Additional manual service switch provided for installer to force lights to hold Off or hold On during installation
• Beep warn unit beeps 3 times after delayed Off time expires, then waits 10 s before turning lights Off
• Exclusive Leviton® high inrush stability(HIS) circuitry, specifically designed to handle today's high inrush electronic ballast loads and offer unmatched durability and service