Chico® SpeedSeal™ compound lets you reliably install a complete explosionproof seal in five minutes. Chico® SpeedSeal™ comes in a self-contained applicator kit that eliminates the need for measuring before mixing. Just pump to mix the material, inject the pre-measured amount, replace the plug and the fitting is sealed. It's that easy. Chico® SpeedSeal™ expands after injection to tightly fill the entire fitting, automatically separating the conductors. The time-consuming and tedious task of packing fiber to separate the individual conductors is eliminated. Once cured, Chico® SpeedSeal™ forms an explosionproof seal around each electrical conductor in Eaton Crouse-Hinds series EYS and EYD sealing fittings, restricting the passage of gases, vapors or flames through the sealing fitting. SpeedSeal™ is approved for use in Class I, Division 1, Groups C, D and Class II, Division 1, Groups E, F, G.

EATON Crouse-Hinds Chico® SpeedSeal™ Sealing Compound, Explosionproof, Cartridge Container, 6 oz Container, Composition: Urethane Polyol, Liquid Form, 4 to 10 min Setting, 20 min Curing, Gray, 1.11 g/mL Specific Gravity, 230 deg C Flash Point

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/CHICO_SS2_Catalog.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/CHICO_SS2_Catalog.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/CHICO_SS2_Installation_Manual_01.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/CHICO_SS2_Installation_Manual_01.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/CHICO_SS6_Specification_Sheet_03.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/CHICO_SS6_Specification_Sheet_03.pdf

• Designed to separate and form an explosionproof seal around each electrical conductor in Eaton's Crouse-Hinds EYS and EYD sealing fittings
• Creates a seal for class I, division 1, groups C, D and class II, division 1, groups E, F, G hazardous areas
• Installs a reliable seal in 5 min every time
• Hardens to a dense, strong mass that is suitable for class I, division 1, groups C, D and class II, division 1, groups E, F, G hazardous applications
• For use with 1/2 to 2 in Eaton Crouse-Hinds series sealing fittings only
• Packaged in a 2 oz pre-measured cartridge, eliminating the need for measuring before mixing
• Packaged with a screw on nozzle for accurate dispensing
• Expands in the sealing fitting, eliminating the need to separate the individual conductors with Chico® X fiber
• Completely hardens in 20 min, simplifying use for OEMs
• Suitable for cold temperature environments without the costly need to build a temporary shelter around sealing fittings