3M™ Cold Shrink Quick Splice low voltage QSLV-M are open-ended tubular rubber sleeves with sealing mastic on each end which are factory expanded and assembled onto a unique three-core system. Two cores, oneon each end, are removed after the QSLV-M insulator has been centered over an inline connector, allowing the ends of the tube to shrink and form a water resistant seal. The third, center segment of the core remains inside the cold shrink tube, acting as a support structure. Sizing of the cores and tube, along with the sealing mastic on each end, is designed to accommodate the variance in connectors and connector crimping techniques and final dimensions without degrading the seal and insulating characteristics of the EPDM rubber tube, while making core removal easy. Two diameter sizes will cover a range of 1000 volt or less cable from 8 AWG through 500 kcmil, copper and aluminum conductors with crimped connectors.

3M™ Cold Shrink Quick Insulator, Low Voltage Splice, Series: QSLV-M, 0.4 in Minimum Dia, 1.6 in Maximum Dia, 2-1/2 in Length, 1400 psi Tensile, Elongation: 7.5, 365 V/mil Dielectric, EPDM, Black

• Compliance Certificate https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/Scotch_054007_10083_Compliance_Certificate.pdf
• MSDS https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/3M_051128_57237_SDS.pdf
• Specification Sheet https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_1520600050741.pdf
• Technical Drawing https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_1520619101917.pdf

• Low voltage single conductor insulated cable
• 1 kV voltage rating
• Simple hand installation, no tools required
• No heat source
• Accommodates wide range of cable sizes, including street lighting
• Excellent wet electrical properties
• Good thermal stability during storage and shipping
• Seals tight, retains resiliency and pressure, even after years of aging and exposure
• Resists acids and alkali
• Water resistant
• 2 AWG to 1000 kcmil (Cu), 2 AWG to 500 kcmil (Al) conductor size
• 0.4 to 1.6 in OD cable insulation