Crouse-Hinds series factory sealed enclosures are used to prevent arcing of enclosed device from causing ignition of a hazardous atmosphere external to the enclosure. Enclosures are used in conjunction with magnetic starters or contactors for remote control of motors.

Crouse-Hinds FlexStation™ Snap Switch Control Station, 1-Gang Dead End Factory Sealed, Series: EDS, 120/277 VAC, 20 A, 1 Pole, Front Operator, Handle Actuator, Thread Connection, NEMA 3/7B/7C/7D/9E/9F/9G NEMA Rating, Surface Mounting, Feraloy® Iron Alloy, Aluminum Acrylic Painted/Electro-Galvanized, 5-7/8 in L x 3-1/2 in W x 2-11/16 in H Dimensions

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/EDSC2240_SA_Catalog_02.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/EDSC2240_SA_Catalog_02.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/EDSC2240_SA_Installation_Manual_02.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/EDSC2240_SA_Installation_Manual_02.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/EDS2129_Specification_Sheet.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/EDS2129_Specification_Sheet.pdf

• Reduce installation problem
• Eliminate external seals
• Lower installation cost
• Improve safety
• Are used with general purpose snap and pushbutton type switches
• Standard neoprene covers for front operated pushbuttons prevents accumulation of dirt and entrance of water around operating shafts
• Mounting lugs and taper tapped hubs with integral bushing
• Large machine screws for fastening covers to bodies
• Lockout provisions on front operated pushbutton (marked "STOP" and "OFF") and selector switch covers
• Lockout hole for padlock having 1/4 in hasp is provided when used with covers for front lever and side rocker type operation
• Close tolerances in machining of wide, mating flanges and journaled shafts and bearings for front button operation, produces flame tightness of enclosure joints
• On enclosures with front lever and side rocker type operating handles, threaded type shafts and bushings are used to ensure flame tightness
• Dust ignitionproof, raintight
• To prevent arcing of enclosed device from causing ignition of a hazardous atmosphere external to the enclosure
• In conjunction with magnetic starters or contactors for remote control of motors
• For manual starting of small AC/DC motors
• To provide manual starting and stopping and motor running protection (with heater)
• 3/4 in hub