The nPODM xS Series WallPods are single gang nLight-enabled devices that provide one, two, and four scene control. These units provide a convenient method of selecting a custom lighting control scene for the room in which it is installed, or requesting a global profile scene be run across several remote zones. By default, however, the buttons of an nPODM xS are configured as on/off toggle switches. Scenes are programmed to these units utilizing available SensorView software. The nPODM xS has soft-click push-buttons with a green LED indicator for each button. These button are field replaceable and can be custom engraved. Two RJ-45 connectors allow the nPODM xS to be daisy-chain wired with CAT-5e cabling to other nLight network devices. The nPODM xSB offers individual on/off buttons for each scene. Pressing the "on" button will reset the expiration time of a scene back to the original programmed time. In order to utilize a blink warning, system gateway and additional programming is required. nPODM xSB WallPods are not recommended for use with "preset" style scenes.

Sensor Switch™ Network Wall Pod, Bush-Button, Series: NPODM, <5 mA, 2 Switches, Operation Mode: On/Off, ON/OFF Control, Wall Mounting, -10 to 71 deg C, White, 2.74 in H x 1.68 in W x 1.63 in D Dimensions

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Lithonia_Lighting_NPODM_DX_IV_Installation_Manual.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Lithonia_Lighting_NPODM_DX_IV_Installation_Manual.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Lithonia_Lighting_NPODM_DX_IV_Specification_Sheet.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Lithonia_Lighting_NPODM_DX_IV_Specification_Sheet.pdf

• Standard dimming control
• Standard dynamic
• Standard humidity
• RJ45 ports network connection
• Communicates with nLight® network
• Remotely configurable
• Runs locally stored scenes or global scenes
• Programmable to initiate occ. sensor time delay sweep
• Dynamic options for custom button names when pairing with Acuity brands nTUNE fixtures
• Capable of programming 4 different scene types
• Expiration timer programmable to each scene
• Single gang switch box or low voltage ring mounting
• Dual on-off action
• Push button actuator