Crouse-Hinds series FS and FD device boxes are installed in non-hazardous area conduit systems to accommodate wiring devices, act as pull boxes or provide openings for taps and splices. They are suitable for use in wet locations when used with gasketed covers. FS and FD device boxes are available in two box depths with a wide variety of gang configurations, hub configurations and hub sizes. They are manufactured in cast iron, aluminum, stainless steel and malleable iron. Malleable iron boxes are also available with a hot dip galvanized finish for added corrosion protection against road salt and other harsh environmental factors.

EATON Crouse-Hinds Condulet® Conduit Device Box, Type FD 1-Entry Deep, Series: FD Series, 1 Gang, 3/4 in Hub, (1) End Cable Entry Size, Surface Mount, Malleable Iron, Electro-Plated Zinc, 2.87 in W x 2.86 in D x 5.3 in H

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/FSCM2_Catalog.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/FSCM2_Catalog.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/FDM2_Specification_Sheet.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/FDM2_Specification_Sheet.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/LB38SS_Technical_Bulletin_02.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/LB38SS_Technical_Bulletin_02.pdf

• Green ground screw is located on the flange of the box for easy ground wire termination and is standard on boxes
• Suitable for use in wet locations when used with gasket and flat blank covers
• Tapered threaded hubs with integral bushing
• Malleable iron construction provides high tensile strength for strong, dependable service
• Ample wiring room provided
• Covers are individually bagged and supplied with screws
• (1) end cable entry