The Leviton® line of LevNet RF™ wall switch receivers work in conjunction with EnOcean-enabled Self- powered wireless lighting control products to provide an optimal solution for retrofit lighting needs. These wireless products combine Leviton® switching technology with self-powered and wireless technologies, developed and licensed from EnOcean®. The wall switch receiver can be installed in place of traditional single pole wall switches and fits in a standard single gang wall box. No additional wiring is required.

Leviton®, WSS10-GUZ, Switch, Non-Neutral Standard Seamless Wireless, 315 MHz Frequency, 120/277 VAC Control, 1/2/3/4 W Power Consumption, Wall Mounting, 32 to 104 deg F Operating, Environmental Conditions: 0 to 95% Non-Condensing Relative Humidity, 1.66 in W x 1.34 in D x 2.69 in H Dimensions

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_663c0df9a28408fd3f1a56002f58191a9cf36b8653d57bb0cb5ca7dd6a3e130f.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_663c0df9a28408fd3f1a56002f58191a9cf36b8653d57bb0cb5ca7dd6a3e130f.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/LevNet_RF_WSS10_GUZ_Manual.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/LevNet_RF_WSS10_GUZ_Manual.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Decora_WSS0S_D0W_Technical_Bulletin.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Decora_WSS0S_D0W_Technical_Bulletin.pdf
• VIDEO LINK https://www.youtube.com/embed/3KeGc5cPX8o

• Advanced pairing with all transmitters
• Dip switches for auto ON/OFF and manual ON/auto OFF
• Vizia® style
• No new wires required
• Product utilizes existing A/C and load wiring RF wall switch receiver
• No neutral
• White, ivory, light almond faceplate
• Walk-through mode
• Fits in a standard 1-gang wallbox
• Standard type seamless installation
• No new wiring required - the RF wall switch receiver simply replaces the existing light switch and then communicates with self-powered switches and sensors via radio frequency
• Manual on/off switching - provides pushbutton manual-ON/off light switching of each light load at any time
• Maximize energy savings - when paired with RF PIR occupancy sensor, RF wall switch contains all sensor settings
• Manual-ON/auto-ON, auto-ON/auto-OFF, walk through timer, auto time out selections of 2 minutes for testing, 10/20/30 minutes
• Allows flexibility and customized adjustments to maximize energy savings
• Presentation/viewing mode - turn lights off and keep them off while room is occupied (i.e.: for slide or film presentations) automatically returns to normal when manually switched back on or room becomes vacant and time delay expires
• Walk-thru feature - maximizes energy savings by assuring a 2.5 minute time out if motion is not present after 2 minutes in auto-ON mode
• Standard size for seamless installation - RF wall switch receiver fits in a standard single gang wall box
• True zero-cross relay - switches at the zero crossing point of the AC power curve to ensure maximum contactor life and compatibility with electronic ballasts
• All digital circuitry - uses minimum components for maximum reliability and low cost