Series 5 die cast copper free aluminum conduit bodies, covers and gaskets are available for use with rigid or EMT conduit (with set screw). Conduit bodies are available in trade sizes 1/2 to 4 in, in the most popular conduit body shapes (C, LB, LL, LR, T) and 1/2 to 2 in TB and X shapes. The series 5 family is available as components or pre-packaged in various configurations as a SnapPack™ assembly. In addition, series 5 is completely interchangeable with other manufacturers.

Crouse-Hinds Condulet® Conduit Outlet Body, Type C Corrosion-Resistant, Series: 5 Series, 1 in Hub, 12.2 cu-in Capacity, NEMA 4 Enclosure, Threaded/Set Screw Connection, Conduit Mounting, Copper Free Aluminum, Epoxy Powder Coated, Gray, 6.44 in L x 1.74 in W x 1.9 in H Dimensions

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/150G_Catalog.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/150G_Catalog.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/150G_User_Manual.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/150G_User_Manual.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/C35_MTC_Specification_Sheet.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/C35_MTC_Specification_Sheet.pdf

• Die cast copper free aluminum construction is lightweight and corrosion resistant for long reliable service
• Epoxy powder coat finish provides additional corrosion resistance and an aesthetically pleasing appearance
• Conduit bodies are supplied with threaded hubs for use with rigid/IMC conduit or as a combination body
• Domed aluminum cover provides additional cubic capacity
• Integral gasket on cover or solid neoprene
• Aluminum with or without integral gasket cover styles
• Act as pull outlets for conductors being installed
• Provide openings for making splices and taps in conductors
• Act as mounting outlets for lighting fixtures and wiring devices
• Connect conduit sections
• Provide taps for branch conduit runs
• Make 90 deg bends in conduit runs
• Provide for access to conductors for maintenance and future system changes
• Sheet steel with or without integral gasket