High Bay Aisle Way lighting control is easily accomplished by the HMRB 10 Series Passive Infrared (PIR) occupancy sensor. This line voltage sensor easily installs to a standard junction box through a 1/2 inch knockout. Designed to be deployed in pairs and mounted 30 to 45 ft (9.14 to13.72 m) high at the both ends of an aisle, each HMRB 10 views up to 110 linear ft (33.53 m)of aisleway space. The HMRB 10 powers itself from line voltage and switches loads directly without the need fora power pack. While ideal for on/off control of T5/T8 fluorescent lighting, HID bi-level fixtures can also be controlled when the Start-to-High (SH) option is added. For simultaneous control of entire aisles, a low voltage solution is recommended. For example, use two HMB 10 Series sensors mounted on the ends with added CMB 50 or CMB 6 Series sensors covering the inner aisle as needed.

Sensor Switch™ Passive Infrared Sensor, High Bay End-of-Aisle, Series: HMRB 10, 120/277 VAC, Fixture Mount, White, 3.63 in H x 3.63 in W x 1.5 in D

• Installation Instructions https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/Lithonia_Lighting_HMRB_10_Instruction_Sheet.pdf
• Specification Sheet https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_1520565268693.pdf
• Specification Sheet https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/Lithonia_Lighting_HMRB_10_Specification_Sheet.pdf
• Specification Sheet https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://www.ideadigitalcontent.com/files/10988/ID-SPE-v1-HMRB-10.pdf
• Warranty https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_1518582693191.pdf
• Warranty https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://www.ideadigitalcontent.com/files/10988/ID-WAR-Acuity_Brands_US_Terms_and_Conditions_of_Sale_Rev_051616_pdf.pdf

• 100% digital PIR detection, excellent RF immunity
• Up to 45 ft Mounting
• Coverage up to 110 linear ft
• Self contained relay - no power pack needed
• Push button programmable
• User adjustable time delays
• No field calibration or sensitivity adjustments required
• Convenient test mode
• 100 hr lamp burn-in timer mode
• 1/2 in knockout mounting
• No STH start-to-high
• Standard temperature and humidity