Series 5 die-cast copper free aluminum conduit bodies, covers and gaskets are available for use with rigid or EMT conduit (with set screw). Conduit bodies are available in trade sizes 1/2 to 4 in, the most popular conduit body shapes (C, LB, LL, LR, T) and 1/2 to 2 in TB and X shapes. The series 5 family is available as components or pre-packaged in various configurations as a SnapPack™ assembly.

EATON Crouse-Hinds Condulet® Conduit Outlet Body, Type T, 1/2 in Hub, 4.35 cu-in Capacity, 5, NEMA 4 Enclosure, Threaded/Set Screw, Surface Mount, Die Cast Copper-Free Aluminum, Epoxy Powder Coated, Gray, 4.82 in L x 1.31 in W x 1.4 in H

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/150G_Catalog.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/150G_Catalog.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/150G_User_Manual.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/150G_User_Manual.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/T15_MTC_Specification_Sheet.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/T15_MTC_Specification_Sheet.pdf

• Die cast copper-free aluminum construction is lightweight and corrosion-resistant for long, reliable service
• Epoxy powder coated finish provides additional corrosion resistance and an aesthetically pleasing appearance
• Conduit bodies are supplied with threaded hubs for use with rigid/IMC conduit or as a combination body
• Domed aluminum cover provides additional cubic capacity
• Integral gasket on cover or solid neoprene
• Aluminum with or without integral gasket cover styles
• Act as pull outlets for conductors being installed
• Provide openings for making splices and taps in conductors
• Act as mounting outlets for lighting fixtures and wiring devices
• Connect conduit sections
• Provide taps for branch conduit runs
• Make 90 deg bends in conduit runs
• Provide for access to conductors for maintenance and future system changes