Leviton® line of heavy duty specification grade receptacles are designed and manufactured to withstand the most demanding environments. Available in a wide variety of configurations, including isolated ground, tamper resistant, etc., these commercial grade devices are the electrical contractor's choice for use in hotels, schools, hospitals and commercial office buildings.

Leviton® Straight Blade Receptacle, Heavy Duty Single, 125 VAC, 15 A, 1/2 hp, 2 Poles, 3 Wires, NEMA 5-15R, Commercial Grade, -40 to 60 deg C, Side Wired Terminal, Thermoplastic, Ivory, 4-1/2 in H x 3-3/4 in W x 4-1/2 in D

• Brochure https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/Leviton_25249_FBA_Brochure.pdf
• Material Safety Sheet https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_1511873511890.pdf
• Specification Sheet https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_1520558090590.pdf
• Technical Drawing https://www.iesbuy.com/IDW_DOCUMENT_1539800514613.jpeg

• Zinc plated steel strap material
• Self-grounding
• Brass triple wipe 0.031 THK line contacts
• Brass-plated ground clips
• #8-32 brass grounding screws, #8-32 brass grounding screws, zinc plated steel strap clamp nuts material, brass-plated ground clips, solid brass floor plate material
• 14 to 10 AWG wire terminal
• Brass plate and screw cap resist abuse and prevent foreign contaminants from entering device
• Tamper resistant receptacles meet national electrical Code® 2014 article 406.12 requirements
• Plate gasket and rubber O-ring combine to seal out moisture and air-borne particles
• Single receptacle is ideal for applications that require a dedicated circuit
• Meets NEC 2014 article 314.27B for floor boxes
• The flange height of 0.27 in meets Americans with Disabilities Act (ADA) standards for accessible design section 4.3.8
• Nickel plated brass configurations also available
• Low voltage 2-gang configurations also available
• 2000 VAC dielectric strength
• Maximum 30 deg C after 50 cycles OL at 150% rated current temperature rise