3M™ motor lead pigtail splicing kits 5300 series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of pigtail (stub) connections at 1000 V and less. The splice's main component, the slip-on lug cover, is made from EPDM rubber. Mastic strips are used for the moisture seal. These kits are designed to be used with copper compression, 1-hole lugs. After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, then insulated and sealed with the 3M™ motor lead splicing kit. Each kit makes three splices and contains the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlok™ copper compression lugs 30000 series or other UL listed copper lugs can be used.

3M™, 5304, Splice Kit, 3-Cable, Series: 5300, 0 to 1000 VAC, Shielded Cable, 250 to 500 kcmil Conductor, 0.67 to 1.05 in OD Insulation, 6.7 in Splice Length, 1 Conductors, Pigtail Connector, 90 to 130 deg C, EPDM Rubber, Black

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_393c588ae7421fe89854517d150e075487058cc6c365e7a97b023bcc04dfa21e.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_393c588ae7421fe89854517d150e075487058cc6c365e7a97b023bcc04dfa21e.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_dfd79800ae6ad1e2065d718daed91d06bd0bae99754de82e6ce0796bf1ab6272.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_dfd79800ae6ad1e2065d718daed91d06bd0bae99754de82e6ce0796bf1ab6272.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_8b6fa009fb1912e54572ee2ac86fa2408fb00f7fe1dfa3b78bc4607a1dafb914.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_8b6fa009fb1912e54572ee2ac86fa2408fb00f7fe1dfa3b78bc4607a1dafb914.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_75b5d7bbb1e5a096f923d6215e9c618a2db5ec7de2c65bde4c87b1e57aed3eeb.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_75b5d7bbb1e5a096f923d6215e9c618a2db5ec7de2c65bde4c87b1e57aed3eeb.pdf

• Fast and simple installation
• No torches or heat source required
• No special tools required to install splice
• Thick walls to resist puncture and abrasion damage
• High dielectric constant stress control included with 5/8 kV kits for shielded feeder cables for minimizing size and electrical stress
• Easy re-entry, can be used on cables with a rated operating temperature of 90 deg c and an emergency overload rating of 130 deg C, to splice (insulate and seal) motor lead connections for 1000 vac and less cables sized 16 AWG to 500 kcmil
• 5/8 kV shielded and non-shielded feeder cables sized 8 AWG to 500 KCMIL, polyethylene cable, cross-linked polyethylene cable (xlp), ethylene propylene rubber cable (epr), copper conductors
• 1-1/2 in maximum bolt length
• 1.7 in id lug cover
• 6.7 in lug cover length
• 1400 psi tensile strength
• 750% elongation
• 365 V/mil dielectric strength
• 1/case
• 250 kcmil to 500 kcmil feeder cable, 4/0 AWG to 500 kcmil motor lead conductor size
• Designed to use with copper compression, 1-hole lugs
• Slip-on lug cover is made of durable EPDM rubber