Crouse-Hinds series factory sealed enclosures are used to prevent arcing of enclosed device from causing ignition of a hazardous atmosphere external to the enclosure. Enclosures are used in conjunction with magnetic starters or contactors for remote control of motors.

Crouse-Hinds FlexStation™ Snap Switch Control Station, 1-Gang 1-Pole Dead End Dust Ignitionproof Explosionproof Factory Sealed Raintight, Series: EDS, 120 to 277 VAC, 20 A, 1 Pole, NEMA 3/7B/7C/7D/9E/9F/9G NEMA Rating, Surface Mounting, Aluminum, Natural, 3-1/2 in L Dimensions

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/EDSC2240_SA_Catalog_02.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/EDSC2240_SA_Catalog_02.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/EDSC2240_SA_Installation_Manual_02.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/EDSC2240_SA_Installation_Manual_02.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/EDS2129_SA_Specification_Sheet.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/EDS2129_SA_Specification_Sheet.pdf

• Reduce installation problem
• Eliminate external seals
• Lower installation cost
• Improve safety
• Are used with general purpose snap and pushbutton type switches
• Standard neoprene covers for front operated pushbutton
• Prevents accumulation of dirt and entrance of water around operating shaft
• Mounting lugs and taper tapped hubs with integral bushing
• Large machine screws for fastening covers to bodies
• Lockout provisions on front operated pushbutton (marked "STOP" and "OFF") and selector switch covers
• Lockout hole for padlock having 1/4 in hasp is provided when used with covers for front lever and side rocker type operation
• Close tolerances in machining of wide, mating flanges and journaled shafts and bearings for front button operation, produces flame tightness of enclosure joints
• On enclosures with front lever and side rocker type operating handles, threaded type shafts and bushings are used to ensure flame tightness
• Front operated, factory sealed
• Wet location