The 6955-20 12 in. dual-bevel sliding compound miter saw offers best in class accuracy, power and ease of use. The miter angle digital readout provides repeatable accuracy to 0.1 deg. The miter angle fine adjust with detent override makes it simple to dial-in precise miter angles. Dual integral jobsite lights fully illuminate the work piece and cut line from either side of the blade. The powerful 15.0 amp, 3.3 max HP direct drive motor provides increased power for high performance cutting in hard lumber. Constant power technology with soft start maintains constant cutting speed under load and decreases start up head movement. The integral dust channel captures up to 75% of the dust and debris cut.

Milwaukee® Sliding Compound Miter Saw, Dual Bevel, 12 in Blade, Carbide Tipped Blade, 5/8 in, 1 in Arbor/Shank, 3200 rpm Speed, Cutting Capacity: 6 in Vertical, 13-1/2 in at 90 deg Cross Cut, Miter Capacity: 55 to 60 deg, Bevel Capacity: 48 deg, Bevel Stops: 0/15/22.5/33.85/45/48 deg Left/Right, 3.3 hp, 120 VAC, 15 A, Steel Housing Material, 23 in L x 21-3/4 in W x 32 in H Dimensions

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Milwaukee_6955_20_Full_Engineering_Drawing.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Milwaukee_6955_20_Full_Engineering_Drawing.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Milwaukee_6955_20_User_Manual.pdf https://www.iesbuy.com//ASSETS/DOCUMENTS/ITEMS/EN/https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Milwaukee_6955_20_User_Manual.pdf

• Miter angle digital readout- provides repeatable accuracy to 0.1 deg
• Miter angle fine adjust with detent override- makes it simple to dial-in precise miter angles
• Dual integral jobsite lights fully illuminate the work piece and cut line from either side of the blade
• Powerful 15 A, 3.3 max hp direct drive motor provides increased power for high performance cutting in hard lumber
• Constant Power Technology™ with soft start maintains constant cutting speed under load and decreases start up head movement
• Integral dust channel- captures up to 75% of the dust and debris cut
• Dual horizontal steel rails with three large linear bearings-deliver smooth sliding action
• Oversized single lever bevel adjustment with (9) positive bevel stops allows the saw to easily bevel left and right 0 to 48 deg and provides fast and accurate adjustments